Member Mastering

Post your work here - Ask for feedback or just show it off
Post Reply
User avatar
Lost to the Void
subsekt
subsekt
Posts: 13518
Joined: Sat Feb 18, 2012 1:31 pm
Member Mastering

Post by Lost to the Void »

Alrighty, so Subsekt member Wouter paid for block mastering from me a while back, but due to time and life, hasn`t had time to use the mastering credits, and donated them to Subsekt.

So the idea is, once per month, I master the top voted track from this section, until the mastering credits run out.

So, once per month I would like everyone to post in to this thread the nominations (you can self nominated). Then once all the names are gathered, I`ll run a poll at the end of the month and we can all vote on who gets mastered.

To make it educational I'll do a write up on the mastering process for each track.

Interested?

Anything else you would like from this process?
Mastering Engineer @ Black Monolith Studio
New Shit
Techno is dead. Long live Techno.

User avatar
Amøbe
Moderate
Posts: 1590
Joined: Thu Oct 13, 2016 4:15 pm
Location: Copenhagen
Re: Member Mastering

Post by Amøbe »

Wow that would be amazing! Thanks both to you and Wouter <3

dubdub
Asphyxiwank
Posts: 2454
Joined: Wed Nov 18, 2015 1:49 pm
Re: Member Mastering

Post by dubdub »

I'm fine with nominations but I personally also wouldn't mind if you just picked a track that you think would be particularily educational to master.

Anways, I'd nonimate this track by Cloaked - https://subsekt.com/viewtopic.php?f=9&t=10427

User avatar
over9000
Nor Crystal Tears
Posts: 1176
Joined: Sat Feb 11, 2017 4:23 pm
Re: Member Mastering

Post by over9000 »

this is a really cool offer!
thx wouter! Does he have a different forum name?
id vote for this by mono https://subsekt.com/viewtopic.php?f=9&t=10287

User avatar
saffron
Opposite
Posts: 78
Joined: Thu Nov 29, 2018 9:48 pm
Location: Berlin
Re: Member Mastering

Post by saffron »

Nice Idea. Thanks for the offer!

I'd vote for this track by Cloaked https://www.subsekt.com/viewtopic.php?f ... 9c68f110e6

User avatar
Lost to the Void
subsekt
subsekt
Posts: 13518
Joined: Sat Feb 18, 2012 1:31 pm
Re: Member Mastering

Post by Lost to the Void »

ok, good suggestions so far.

Let`s say the deadline for nominations is 22nd July, then I can put up a poll for voting and get the mastering done at the end of the month.
Mastering Engineer @ Black Monolith Studio
New Shit
Techno is dead. Long live Techno.

User avatar
ZenoSupreme
arsehole
Posts: 305
Joined: Thu Jul 13, 2017 9:01 pm
Re: Member Mastering

Post by ZenoSupreme »

Wow, thats really awsome! Big up for Wouter!!

is there a possibility to post before and after comparrison, perhaps I'm asking to much, but it would be educational and really nice :)

darkinprg
Interact. Don't Spam.
Posts: 15
Joined: Tue May 21, 2019 12:03 pm
Re: Member Mastering

Post by darkinprg »

over9000 wrote:
Tue Jul 02, 2019 7:51 pm
this is a really cool offer!
thx wouter! Does he have a different forum name?
id vote for this by mono https://subsekt.com/viewtopic.php?f=9&t=10287
Hi, all...
a noble gesture !


I give +1 to Mono

Cloaked
hunger marcher
Posts: 288
Joined: Thu Sep 13, 2012 1:14 pm
Re: Member Mastering

Post by Cloaked »

Fantastic idea. I wanted to ask you for ages for mastering rates but never finished any mixes that I think are worth it.

Thanks also if anyone mentioned my tracks above, I honestly thought something bot-related was going on, you don't expect to see yourself mentioned out of nowhere!

For my vote there are tonnes of good producers here. Any one would merit the offer. But I would like to vote for Jordan, any of the recent techier tunes.

darkinprg
Interact. Don't Spam.
Posts: 15
Joined: Tue May 21, 2019 12:03 pm
Re: Member Mastering

Post by darkinprg »

Cloaked wrote:
Mon Aug 05, 2019 9:58 am
Fantastic idea. I wanted to ask you for ages for mastering rates but never finished any mixes that I think are worth it.

Thanks also if anyone mentioned my tracks above, I honestly thought something bot-related was going on, you don't expect to see yourself mentioned out of nowhere!

For my vote there are tonnes of good producers here. Any one would merit the offer. But I would like to vote for Jordan, any of the recent techier tunes.
maybe i miss something, but link for Jordans track?

User avatar
juodas
Indirection
Posts: 872
Joined: Thu Jan 07, 2016 3:42 pm
Re: Member Mastering

Post by juodas »

are you still running this Void?

User avatar
Lost to the Void
subsekt
subsekt
Posts: 13518
Joined: Sat Feb 18, 2012 1:31 pm
Re: Member Mastering

Post by Lost to the Void »

Ok, let`s get this started.

Nominations for each month can go in here, then I`ll do a pole and you can vote on who gets the treatment.
Mastering Engineer @ Black Monolith Studio
New Shit
Techno is dead. Long live Techno.

User avatar
henry1
Chernobyl
Posts: 100
Joined: Sun Sep 22, 2019 11:25 am
Re: Member Mastering

Post by henry1 »

I like this one:



From the following thread:

https://subsekt.com/viewtopic.php?f=9&t=10655

Hope it gets votes.

Can we get a copy when its done? :lol:

User avatar
2latuile
hmmmmmm...
Posts: 363
Joined: Mon Sep 30, 2019 4:57 pm
Location: Bordeaux, France
Contact:
Re: Member Mastering

Post by 2latuile »

henry1 wrote:
Mon Feb 24, 2020 5:20 pm
I like this one:



From the following thread:

https://subsekt.com/viewtopic.php?f=9&t=10655

Hope it gets votes.

Can we get a copy when its done? :lol:
@henry1 you may want to repost this here then https://subsekt.com/viewtopic.php?f=9&t=11032.
Lost to the Void wrote: I am unlikely to teach small children how to break someone violently (...). So I think it will be fine.
[wesellboxes] wrote: Anyone that believes in conspiracy theories has never worked in project management.

User avatar
henry1
Chernobyl
Posts: 100
Joined: Sun Sep 22, 2019 11:25 am
Re: Member Mastering

Post by henry1 »


@henry1 you may want to repost this here then https://subsekt.com/viewtopic.php?f=9&t=11032.
Noted bro.
Actually proposed it for last month.
Since Speen got it anyway, would be great to see another producer get the mastering this month!


Post Reply